- How much is the home battery rebate?
- Under the Cheaper Home Batteries Program a battery installed by 31 December 2026 earns 6.8 small-scale technology certificates per kWh of usable capacity on its first 14 kWh, 60% of that on the next 14 kWh and 15% up to 50 kWh. Installers take the certificates in return for an upfront discount: at $35.50 a certificate, about $2,414 off a 10 kWh battery and $4,864 off a 24.4 kWh battery, the average size installed since 1 May 2026.
- When does the battery rebate drop?
- On 1 January 2027, when the factor falls from 6.8 to 5.7 certificates per kWh: a 10 kWh battery goes from about $2,414 to $2,024 off. It then falls again every 1 January and 1 July until the scheme ends with 2030. The factor is set by the date the installation is completed and certified, not the date of the quote or contract.
- How many home batteries have been installed in Australia?
- 546,789 from 1 July 2025 to 30 September 2026, adding 15.3 GWh of usable storage, 28.0 kWh each on average. The busiest month was April 2026, with 87,128, in the rush before the factor cut and size taper of 1 May 2026. The latest months will still rise: installers have 12 months to create certificates, and a battery is counted once they are validated.
- Which state has the most home batteries?
- New South Wales, with 187,154 since July 2025, then Queensland (110,578) and Victoria (110,029). Against the solar already on roofs, New South Wales leads with 15.6 batteries for every 100 solar systems installed since 2001; the national figure is 12.0.
- How much is the solar panel rebate for a 6.6 kW system?
- It depends on your postcode's zone. Installed by 31 December 2026, a 6.6 kW system earns 45 certificates (about $1,598) in zone 3, which includes Sydney, Brisbane, Perth, Adelaide and Canberra, and 39 (about $1,385) in zone 4, which includes Melbourne and Hobart. From 1 January 2027 the deeming period drops from 5 to 4 years, so the same systems earn 36 and 31.
- What feed-in tariff will I get for exported solar?
- The median flat feed-in tariff among open residential electricity plans, as retailers publish them: NSW 3.00c, VIC 1.00c, QLD 1.00c, SA 1.00c, TAS 10.87c, ACT 3.00c per kWh, as of 28 Oct 2026. The highest published rates are listed by state on this page; they often come with higher usage or supply charges. WA and NT retailers do not publish plans through the Consumer Data Right.
- Why are the latest months lower?
- Installers have 12 months from installation to create certificates, and the Clean Energy Regulator counts a system once its certificates are validated. The most recent months keep rising for up to a year, and September 2026 is the least complete.
- Where do these figures come from?
- Installations come from the Clean Energy Regulator's small-scale installation postcode data, published monthly under a Creative Commons Attribution 4.0 licence and normalised by The Finance Algorithm. Feed-in tariffs and usage rates come from the plans retailers publish under the Consumer Data Right. Certificate factors, deeming periods and postcode zones come from the Regulator and the Renewable Energy (Electricity) Regulations 2001, checked 7 October 2026.